VELCRO® 91100 Heavy Duty Industrial Strength - Low Profile
10 ft Length x 1" Width - Water Resistant - For Mounting - 1 / RollRoll - Black
-
Holds up to 10 lbs. (1 lb. per 1" square)
-
NO TOOLS REQUIRED: No hammer, drilling, nails, or epoxy necessary; a simple solution to organize on many surfaces without putting holes in the wall
-
For use in extreme temps, from -40*-194*
-
Ideal option when 50% more strength is needed for keeping things organized and connected
Velcro Companies
|
075967911003
|
RL
|
602 |
Velcro Companies |
91100 |
http://www.velcro.com |
VELCRO® |
ULTRA-MATE |
91100 Heavy Duty Industrial Strength - Low Profile |
Ultra-thin, high-performance, hook-and-loop fastener features 30 percent less height than VELCRO Brand's industrial-strength tape for a less visible contact point. Ultra-Mate Tape offers a water-resistant adhesive. More from the Manufacturer |
1 / Roll |
Hook & Loop Fastener |
1" |
10 ft |
MountingIndustrial |
Heavy Duty |
Roll |
Water Resistant |
Black |
Shape: Roll Care and Application: Instructions: Clean and dry surface before application Peel tape from fastener and press firmly into place Adhesive reaches maximum strength after 24 hours Note: Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. Removal Instructions: Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun) Peel off the tape (Hook or Loop) the adhesive will remain on the substrate Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments) Stick the ball on the adhesive which is on your substrate and pull it off Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners Weight Rating: 1 lbs per square inch up to 10 lbs Functional Temperature Range: 0-120° F (-18-49° C) |
No |
No |
United States |